Study of activated carbon characteristic from ketaping fruit shell (Terminalia Catappa) as supercapasitors electrode

Rahma Joni, Syukri Syukri, Hermansyah Aziz

Abstract


Studi karakteristik karbon aktif dari cangkang buah ketaping (Terminalia Catappa) sebagai elektroda superkapasitor telah diteliti. Karbon aktif dari cangkang buah ketaping (CBK) disiapkan dengan proses karbonisasi pada suhu 400oC dan Proses aktivasi KOH pada suhu 800oC di bawah aliran gas N2. Karbon aktif CBK memiliki kandungan karbon dengan massa atomik sebesar 97,52%. Karbon aktif CBK memiliki struktur amorf dengan dua buah puncak yang lebar pada sudut 2θ yaitu 24,93o dan 42,93o yang bersesuaian dengan bidang (002) dan (100). Karbon aktif CBK yang dihasilkan memiliki pola serapan dengan jenis ikatan OH, C-H, C=O, dan C=C. Adanya ikatan OH dan C=O menunjukkan bahwa arang aktif yang dihasilkan cenderung bersifat lebih polar. Morfologi permukaan karbon aktif CBK menunjukan distribusi ukuran pori yang merata dan luas permukaan yang besar. Luas permukaan spesifik karbon aktif dari CBK adalah 799,892 m2×g-1 dengan volume total pori 0,080 cm3×g-1 dan jari-jari pori rata-rata 1,9072 nm. Kapasitansi spesifik dari karbon aktif dari CBK adalah sebesar 125,446 F×g-1.

 

Studies on the characteristics of activated carbon from ketaping fruit shells (Terminalia Catappa) as supercapacitor electrodes have been studied. Activated carbon from ketaping fruit shells (KFS) prepared by carbonization process at 400oC and the KOH activation process is carried out at 800oC under N2 gas flow. Activated carbon KFS has a carbon content with 97.52% of atomic mass. Activated carbon KFS has an amorphous structure with two wide peaks at an angle of 2θ 24.93ᵒ and 42.93ᵒ corresponding to the plane (002) and (100). Activated carbon KFS produced has an absorption pattern with OH, C-H, C = O, and C = C bond types. The presence of OH and C = O bonds indicates that the activated charcoal produced tends to be more polar. The surface morphology of activated carbon KFS shows an even distribution of pore size and large surface area. The specific surface area of activated carbon KFS is 799.892 m2×g-1 with a total pore volume 0.080 cm3×g-1 and an average pore radius of 1.9072 nm. The specific capacitance value of activated carbon KFS is 125.444 F×g-1.

Keywords: Ketaping, Activated Carbon, Supercapacitor, Activator, Capacitance.

 


Keywords


Ketaping, Activated Carbon, Supercapacitor, Activator, Capacitance.

Full Text:

PDF

References


Abioye, A. M. and Ani, F. N. (2015) ‘Recent development in the production of activated carbon electrodes from agricultural waste biomass for supercapacitors: A review’, Renewable and Sustainable Energy Reviews. Elsevier, 52, pp. 1282–1293. doi: 10.1016/j.rser.2015.07.129.

Aziz, H. et al. (2016) ‘Electrical properties of supercapacitor electrode-based on activated carbon from waste palm kernel shells’, Der Pharma Chemica, 8(15), pp. 227–232.

Enock, T. K. et al. (2017) ‘Status of Biomass Derived Carbon Materials for Supercapacitor Application’, International Journal of Electrochemistry, 2017, pp. 1–14. doi: 10.1155/2017/6453420.

Farma, R. et al. (2013) ‘Preparation of highly porous binderless activated carbon electrodes from fibres of oil palm empty fruit bunches for application in supercapacitors’, Bioresource Technology, 132, pp. 254–261. doi: 10.1016/j.biortech.2013.01.044.

González-García, P. (2018) ‘Activated carbon from lignocellulosics precursors: A review of the synthesis methods, characterization techniques and applications’, Renewable and Sustainable Energy Reviews. Elsevier Ltd, 82(xxxx), pp. 1393–1414. doi: 10.1016/j.rser.2017.04.117.

Hui, T. S. and Zaini, M. A. A. (2015) ‘Potassium hydroxide activation of activated carbon: A commentary’, Carbon Letters, 16(4), pp. 275–280. doi: 10.5714/CL.2015.16.4.275.

Kalyani, P. and Anitha, A. (2013) ‘Biomass carbon & its prospects in electrochemical energy systems’, International Journal of Hydrogen Energy. Elsevier Ltd, 38(10), pp. 4034–4045. doi: 10.1016/j.ijhydene.2013.01.048.

De Lange, M. F. et al. (2014) ‘Adsorptive characterization of porous solids: Error analysis guides the way’, Microporous and Mesoporous Materials. Elsevier Inc., 200, pp. 199–215. doi: 10.1016/j.micromeso.2014.08.048.

Largitte, L. et al. (2016) ‘Comparison of the adsorption of lead by activated carbons from three lignocellulosic precursors’, Microporous and Mesoporous Materials. Elsevier Ltd, 219, pp. 265–275. doi: 10.1016/j.micromeso.2015.07.005.

Lee, H. M. et al. (2019) ‘Mesopore-rich activated carbons for electrical double-layer capacitors by optimal activation condition’, Nanomaterials, 9(4). doi: 10.3390/nano9040608.

Lee, K. S., Park, M. S. and Kim, J. D. (2017) ‘Nitrogen doped activated carbon with nickel oxide for high specific capacitance as supercapacitor electrodes’, Colloids and Surfaces A: Physicochemical and Engineering Aspects. Elsevier B.V., 533, pp. 323–329. doi: 10.1016/j.colsurfa.2017.09.008.

Li, Q. et al. (2018) ‘Ruthenium based materials as electrode materials for supercapacitors’, Chemical Engineering Journal, 333(September), pp. 505–518. doi: 10.1016/j.cej.2017.09.170.

Lobato, B. et al. (2017) ‘Capacitance and surface of carbons in supercapacitors’, Carbon, 122, pp. 434–445. doi: 10.1016/j.carbon.2017.06.083.

Misnon, I. I. et al. (2015) ‘Electrochemical properties of carbon from oil palm kernel shell for high performance supercapacitors’, Electrochimica Acta. Elsevier Ltd, 174(1), pp. 78–86. doi: 10.1016/j.electacta.2015.05.163.

Mopoung, S. et al. (2015) ‘Characterization and Properties of Activated Carbon Prepared from Tamarind Seeds by KOH Activation for Fe(III) Adsorption from Aqueous Solution’, Scientific World Journal, 2015. doi: 10.1155/2015/415961.

Ouensanga, A., Largitte, L. and Arsene, M. A. (2003) ‘The dependence of char yield on the amounts of components in precursors for pyrolysed tropical fruit stones and seeds’, Microporous and Mesoporous Materials, 59(2–3), pp. 85–91. doi: 10.1016/S1387-1811(03)00288-9.

Pagketanang, T. et al. (2015) Microporous Activated Carbon from KOH-Activation of Rubber Seed-Shells for Application in Capacitor Electrode, Energy Procedia. Elsevier B.V. doi: 10.1016/j.egypro.2015.11.550.

Poonam et al. (2019) ‘Review of supercapacitors: Materials and devices’, Journal of Energy Storage, 21(October 2018), pp. 801–825. doi: 10.1016/j.est.2019.01.010.

Rawal, S., Joshi, B. and Kumar, Y. (2018) ‘Synthesis and characterization of activated carbon from the biomass of Saccharum bengalense for electrochemical supercapacitors’, Journal of Energy Storage. Elsevier, 20(October), pp. 418–426. doi: 10.1016/j.est.2018.10.009.

Sun, F. et al. (2016) ‘Porous carbon with a large surface area and an ultrahigh carbon purity via templating carbonization coupling with KOH activation as excellent supercapacitor electrode materials’, Applied Surface Science. Elsevier B.V., 387, pp. 857–863. doi: 10.1016/j.apsusc.2016.06.176.

Taer, E. et al. (2018) ‘The physical and electrochemical properties of activated carbon electrode made from Terminalia Catappa leaf (TCL) for supercapacitor cell application’, Journal of Physics: Conference Series, 1120(1). doi: 10.1088/1742-6596/1120/1/012007.

Tashima, D. et al. (2014) ‘Microporous activated carbons from used coffee grounds for application to electric double-layer capacitors’, IEEJ Transactions on Electrical and Electronic Engineering, 9(4), pp. 343–350. doi: 10.1002/tee.21978.

Wei, L. and Yushin, G. (2012) ‘Nanostructured activated carbons from natural precursors for electrical double layer capacitors’, NaAbioye, A. M. and Ani, F. N. (2015) ‘Recent development in the production of activated carbon electrodes from agricultural waste biomass for supercapacitors: A review’, Renewable and Sustainable Energy Reviews. Elsevier, 52, pp. 1282–1293. doi: 10.1016/j.rser.2015.07.129.

Aziz, H. et al. (2016) ‘Electrical properties of supercapacitor electrode-based on activated carbon from waste palm kernel shells’, Der Pharma Chemica, 8(15), pp. 227–232.

Enock, T. K. et al. (2017) ‘Status of Biomass Derived Carbon Materials for Supercapacitor Application’, International Journal of Electrochemistry, 2017, pp. 1–14. doi: 10.1155/2017/6453420.

Farma, R. et al. (2013) ‘Preparation of highly porous binderless activated carbon electrodes from fibres of oil palm empty fruit bunches for application in supercapacitors’, Bioresource Technology, 132, pp. 254–261. doi: 10.1016/j.biortech.2013.01.044.

González-García, P. (2018) ‘Activated carbon from lignocellulosics precursors: A review of the synthesis methods, characterization techniques and applications’, Renewable and Sustainable Energy Reviews. Elsevier Ltd, 82(xxxx), pp. 1393–1414. doi: 10.1016/j.rser.2017.04.117.

Hui, T. S. and Zaini, M. A. A. (2015) ‘Potassium hydroxide activation of activated carbon: A commentary’, Carbon Letters, 16(4), pp. 275–280. doi: 10.5714/CL.2015.16.4.275.

Kalyani, P. and Anitha, A. (2013) ‘Biomass carbon & its prospects in electrochemical energy systems’, International Journal of Hydrogen Energy. Elsevier Ltd, 38(10), pp. 4034–4045. doi: 10.1016/j.ijhydene.2013.01.048.

De Lange, M. F. et al. (2014) ‘Adsorptive characterization of porous solids: Error analysis guides the way’, Microporous and Mesoporous Materials. Elsevier Inc., 200, pp. 199–215. doi: 10.1016/j.micromeso.2014.08.048.

Largitte, L. et al. (2016) ‘Comparison of the adsorption of lead by activated carbons from three lignocellulosic precursors’, Microporous and Mesoporous Materials. Elsevier Ltd, 219, pp. 265–275. doi: 10.1016/j.micromeso.2015.07.005.

Lee, H. M. et al. (2019) ‘Mesopore-rich activated carbons for electrical double-layer capacitors by optimal activation condition’, Nanomaterials, 9(4). doi: 10.3390/nano9040608.

Lee, K. S., Park, M. S. and Kim, J. D. (2017) ‘Nitrogen doped activated carbon with nickel oxide for high specific capacitance as supercapacitor electrodes’, Colloids and Surfaces A: Physicochemical and Engineering Aspects. Elsevier B.V., 533, pp. 323–329. doi: 10.1016/j.colsurfa.2017.09.008.

Li, Q. et al. (2018) ‘Ruthenium based materials as electrode materials for supercapacitors’, Chemical Engineering Journal, 333(September), pp. 505–518. doi: 10.1016/j.cej.2017.09.170.

Lobato, B. et al. (2017) ‘Capacitance and surface of carbons in supercapacitors’, Carbon, 122, pp. 434–445. doi: 10.1016/j.carbon.2017.06.083.

Misnon, I. I. et al. (2015) ‘Electrochemical properties of carbon from oil palm kernel shell for high performance supercapacitors’, Electrochimica Acta. Elsevier Ltd, 174(1), pp. 78–86. doi: 10.1016/j.electacta.2015.05.163.

Mopoung, S. et al. (2015) ‘Characterization and Properties of Activated Carbon Prepared from Tamarind Seeds by KOH Activation for Fe(III) Adsorption from Aqueous Solution’, Scientific World Journal, 2015. doi: 10.1155/2015/415961.

Ouensanga, A., Largitte, L. and Arsene, M. A. (2003) ‘The dependence of char yield on the amounts of components in precursors for pyrolysed tropical fruit stones and seeds’, Microporous and Mesoporous Materials, 59(2–3), pp. 85–91. doi: 10.1016/S1387-1811(03)00288-9.

Pagketanang, T. et al. (2015) Microporous Activated Carbon from KOH-Activation of Rubber Seed-Shells for Application in Capacitor Electrode, Energy Procedia. Elsevier B.V. doi: 10.1016/j.egypro.2015.11.550.

Poonam et al. (2019) ‘Review of supercapacitors: Materials and devices’, Journal of Energy Storage, 21(October 2018), pp. 801–825. doi: 10.1016/j.est.2019.01.010.

Rawal, S., Joshi, B. and Kumar, Y. (2018) ‘Synthesis and characterization of activated carbon from the biomass of Saccharum bengalense for electrochemical supercapacitors’, Journal of Energy Storage. Elsevier, 20(October), pp. 418–426. doi: 10.1016/j.est.2018.10.009.

Sun, F. et al. (2016) ‘Porous carbon with a large surface area and an ultrahigh carbon purity via templating carbonization coupling with KOH activation as excellent supercapacitor electrode materials’, Applied Surface Science. Elsevier B.V., 387, pp. 857–863. doi: 10.1016/j.apsusc.2016.06.176.

Taer, E. et al. (2018) ‘The physical and electrochemical properties of activated carbon electrode made from Terminalia Catappa leaf (TCL) for supercapacitor cell application’, Journal of Physics: Conference Series, 1120(1). doi: 10.1088/1742-6596/1120/1/012007.

Tashima, D. et al. (2014) ‘Microporous activated carbons from used coffee grounds for application to electric double-layer capacitors’, IEEJ Transactions on Electrical and Electronic Engineering, 9(4), pp. 343–350. doi: 10.1002/tee.21978.

Wei, L. and Yushin, G. (2012) ‘Nanostructured activated carbons from natural precursors for electrical double layer capacitors’, Nano Energy. Elsevier, 1(4), pp. 552–565. doi: 10.1016/j.nanoen.2012.05.002.

Yanti, S., Taer, E. and Sugianto (2014) ‘Efek Modifikasi Permukaan Karbon Aktif Monolit Terhadap Sifat Fisis Dan Elektrokimia Sel Superkapasitor’, 1(2), pp. 161–168.

Zheng, K. et al. (2017) ‘The porous carbon derived from water hyacinth with well-designed hierarchical structure for supercapacitors’, Journal of Power Sources, 366, pp. 270–277. doi: 10.1016/j.jpowsour.2017.09.034.

Zhong, X. et al. (2017) ‘Cross-linking of polymer and ionic liquid as high-performance gel electrolyte for flexible solid-state supercapacitors’, Electrochimica Acta. Elsevier Ltd, 244, pp. 112–118. doi: 10.1016/j.electacta.2017.05.110.




DOI: https://doi.org/10.24815/jacps.v10i1.17755

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


NDEXED AND HARVESTED BY

    

 

This work is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0).

©2020 | J. Aceh Phys. Soc. | Banda Aceh, Indonesia | www.jurnal.unsyiah.ac.id/JAcPS | E-ISSN 2355-8229