A Single Phase Active Front-End Converter for Unity Power Factor

Farid Dwi Murdianto, Indhana Sudiharto, Ahmad Hisam Nizar

Abstract


A rectifier is an electronic circuit that converts Alternating Current (AC) into Direct Current (DC). This circuit is very important in many electronic applications, especially in power supplies, battery chargers, and other equipment requiring a DC power supply. Conventional rectifiers use diodes or thyristors as rectifying components. Although a rectifier that uses a diode is generally effective and easy to apply in converting AC to DC, the diode or thyristor component has several drawbacks when used as a rectifier, namely the low power factor on the supply side. To overcome these deficiencies, this paper presents the topic of front-end converter which uses Insulated Gate Bipolar Transistor (IGBT) components as a substitute for diode and thyristor components. IGBT is an active component so a SPWM signal is needed to regulate this IGBT so that it can work. In this front-end converter, to achieve unity power factor results on the supply side, SPWM is used so that it can adjust the current waveform on the supply side to be in phase with the voltage waveform on the source side. The front-end converter presented in this paper has also added the load on the AC side to prove the work of the Front-End Converter.

Keywords


Front-End Converter; Power Factor Correction; Rectifier; IGBT

Full Text:

PDF

References


S. Tripathi and R. Batra, “Operation and control of single phase front end converter,” in 2020 1st IEEE International Conference on Measurement, Instrumentation, Control and Automation, ICMICA 2020, Institute of Electrical and Electronics Engineers Inc., Jun. 2020. doi: 10.1109/ICMICA48462.2020.9242832.

S. Dwari, R. Dayal, L. Parsa, and K. N. Salama, “Efficient Direct AC-to-DC Converters for Vibration-Based Low Voltage Energy Harvesting,” 2008. doi: Dwari, S., Dayal, R., Parsa, L., & Salama, K. N. (2008). Efficient direct ac-to-dc converters for vibration-based low voltage energy harvesting. 2008 34th Annual Conference of IEEE Industrial Electronics. doi:10.1109/iecon.2008.4758319.

M. Pichan, A. A. Ahamad, A. Arishamifar, and M. E. Jamarani, “A Straightforward Procedure to Select Passive Elements in Single-phase Pulse-width Modulation Rectifiers with Developed Resonant Current Controller,” Electric Power Components and Systems, vol. 44, no. 4, pp. 379–389, Feb. 2016, doi: 10.1080/15325008.2015.1117164.

Y. Chen, J. Zhou, W. P. Dai, and E. Hu, “Application of improved bridgeless power factor correction based on one-cycle control in electric vehicle charging system,” Electric Power Components and Systems, vol. 42, no. 2, pp. 112–123, Jan. 2014, doi: 10.1080/15325008.2013.846440.

X. Tian, F. Forest, and F. Tonnerieux, “Power factor improvement for an electrical vehicle battery charger,” Electric Machines and Power Systems, vol. 15, no. 4–5, pp. 253–267, 1988, doi: 10.1080/07313568808909337.

J. Zhang, B. Yang, G. Zeng, and Y. Tian, A Unity Power Factor Control Method of PWM Rectifier. doi: https://doi.org/10.1109/APPEEC.2012.6306905.

Y. Yang and K. Zhou, “Modeling and control of single-phase AC/DC converters,” in Control of Power Electronic Converters and Systems, Elsevier, 2018, pp. 93–115. doi: 10.1016/B978-0-12-805245-7.00004-4.

G. N. Khanduja, “Design of controller for Unity Power Factor Regenerative Front-End Converter,” 2011. doi: https://doi.org/10.1109/INDCON.2011.6139592.

B. Yodwong, D. Guilbert, M. Phattanasak, W. Kaewmanee, M. Hinaje, and G. Vitale, “AC-DC converters for electrolyzer applications: State of the art and future challenges,” Electronics (Switzerland), vol. 9, no. 6. MDPI AG, Jun. 01, 2020. doi: 10.3390/electronics9060912.

A. P. N. Tekwani and B. G. N. Khanduja, “Modeling, controller design and simulation of power system friendly power supply,” Renewable Energy and Power Quality Journal, vol. 1, no. 8, pp. 90–95, Apr. 2010, doi: 10.24084/repqj08.233.

M. Malinowski, M. P. Kazmierkowski, and A. Trzynadlowski, “Review and comparative study of control techniques for three-phase PWM rectifiers,” in Mathematics and Computers in Simulation, Nov. 2003, pp. 349–361. doi: 10.1016/S0378-4754(03)00081-8.

R. , A. N. , S. M. , & T. P. N. Mathew, “Design, Modelling and Simulation of Three-Phase Front-End Converter for Unity Power Factor and Reduced Harmonics in Line Current,” 2013. doi: https://doi.org/10.1109/NUiCONE.2013.6780145.

A. M. Blanco, S. Yanchenko, J. Meyer, and P. Schegner, “The impact of supply voltage distortion on the harmonic current emission of non-linear loads,” DYNA (Colombia), vol. 82, no. 192, pp. 150–159, Aug. 2015, doi: 10.15446/dyna.v82n192.48591.

A. Ndokaj and A. Di Napoli, Converter Simultaneously as Active Front End and as Active Filter. 2013. doi: https://doi.org/10.1109/ICCEP.2013.6586908.

K. Thiyagarajah, V. T. Ranganathan, and B. S. Ramakrishna Iyengar, “A High Switching Frequency IGBT PWM Rectified Inverter System for AC Motor Drives Operating from Single Phase Supply,” 1991. doi: https://doi.org/10.1109/63.97755.

C. C. Hou and P. T. Cheng, “Experimental verification of the active front-end converters dynamic model and control designs,” IEEE Trans Power Electron, vol. 26, no. 4, pp. 1112–1118, 2011, doi: 10.1109/TPEL.2010.2097607.

D. V Garasiya, S. C. Vora, and P. N. Kapil, “Simulation, Design and Practical Realization of Single Phase PWM Boost Rectifier,” 2012. doi: https://doi.org/10.1109/NUICONE.2012.6493272.

A. Mansoor et al., “Effect of Supply Voltage Harmonics on the Input Current of Single-phase Diode Bridge Rectifier Loads,” 1995. doi: https://doi.org/10.1109/61.400924.

H.-Ssong and K. Nam, “Instantaneous phase-angle estimation algorithm under unbalanced voltage-sag conditions,” 2000. doi: https://doi.org/10.1049/ip-gtd:20000716.

A. Mansoor et al., “Effect of Supply Voltage Harmonics on the Input Current of Single-phase Diode Bridge Rectifier Loads,” 1995. doi: https://doi.org/10.1109/61.400924.




DOI: https://doi.org/10.17529/jre.v21i2.33502

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


View My Stats

 

Creative Commons License

Jurnal Rekayasa Elektrika (JRE) is published under license of Creative Commons Attribution-ShareAlike 4.0 International License.