Optimizing Light Detection with Photodiode Sensor Arrays using Linear Regression

Rahmat Fauzi Siregar, Muhamad Yusvin Mustar, Affandi Affandi, Arya Rudi Nasution, Adelia Febrina Br. Sembiring

Abstract


Photodiode sensors are widely used in various applications such as light intensity measurement, optoelectronic devices, and automation. In improving the quality of measurement and automation systems, more sophisticated technology is needed such as photodiode sensor arrays, which allow more accurate data collection from multiple sensors simultaneously. This research aims to design a photodiode sensor array with high sensitivity. The system design consists of six photodiode sensors combined with a summing amplifier circuit and a non-inverting amplifier as a signal conditioner which is then processed by a microcontroller. After that, the linear regression function is determined through the calibration process and experiments carried out. Two linear regression functions are obtained and implemented in two operating modes: normal mode and sensitive mode. Experimental results yield two linear regression functions applied to a photodiode sensor array in normal and sensitive modes. Normal mode shows 69.71% accuracy with a 32.81% Coefficient of Variation, while sensitive mode boasts 93.87% accuracy and 44.45% Coefficient of Variation. Both modes cater to different light conditions, with sensitive mode excelling in detecting light intensity. Linear regression implementation proves precise and accurate for light detection.

Keywords


Calibration; Linear Regression; Photodiode Sensor Array; Signal Conditioning

Full Text:

PDF

References


Q. Chen, X. Zhang, M. S. Sharawi, and R. Kashyap, “Advances in High–Speed, High–Power Photodiodes: From Fundamentals to Applications,” Appl. Sci., vol. 14, no. 8, 2024, doi: 10.3390/app14083410.

K. A. Lozovoy et al., “Silicon-Based Avalanche Photodiodes: Advancements and Applications in Medical Imaging,” Nanomaterials, vol. 13, no. 23, 2023, doi: 10.3390/nano13233078.

H. Liu, J. Wang, D. Guo, K. Shen, B. Chen, and J. Wu, “Design and Fabrication of High Performance InGaAs near Infrared Photodetector,” Nanomaterials, vol. 13, no. 21, 2023, doi: 10.3390/nano13212895.

S. Xie and A. J. P. Theuwissen, “Suppression of Spatial and Temporal Noise in a CMOS Image Sensor,” IEEE Sens. J., vol. 20, no. 1, pp. 162–170, 2020, doi: 10.1109/JSEN.2019.2941122.

M. A. Zaidan et al., “Intelligent Calibration and Virtual Sensing for Integrated Low-Cost Air Quality Sensors,” IEEE Sens. J., vol. 20, no. 22, pp. 13638–13652, 2020, doi: 10.1109/JSEN.2020.3010316.

C. Liu, C. Zhao, Y. Wang, and H. Wang, “Machine-Learning-Based Calibration of Temperature Sensors,” Sensors, vol. 23, no. 17, 2023, doi: 10.3390/s23177347.

M. Si, Y. Xiong, S. Du, and K. Du, “Evaluation and calibration of a low-cost particle sensor in ambient conditions using machine-learning methods,” Atmos. Meas. Tech., vol. 13, no. 4, pp. 1693–1707, 2020, doi: 10.5194/amt-13-1693-2020.

K. Koritsoglou et al., “Improving the Accuracy of Low-Cost Sensor Measurements for Freezer Automation,” Sensors, vol. 20, no. 21, 2020, doi: 10.3390/s20216389.

H. Gan, J. Yu, and X. Wang, “Enhancing Linearity of Light Response in Avalanche Photodiodes by Suppressing Electrode Size Effect,” Sensors, vol. 24, no. 11, 2024, doi: 10.3390/s24113366.

H. T. Chandran et al., “Deriving the linear dynamic range of next-generation thin-film photodiodes: Pitfalls and guidelines,” Appl. Phys. Lett., vol. 124, no. 10, p. 101113, 2024, doi: 10.1063/5.0184847.

C. Bartolo-Perez et al., “Avalanche photodetectors with photon trapping structures for biomedical imaging applications,” Opt. Express, vol. 29, no. 12, p. 19024, 2021, doi: 10.1364/oe.421857.

O. Hotra, V. Firago, N. Levkovich, and K. Shuliko, “Investigation of the Possibility of Using Microspectrometers Based on CMOS Photodiode Arrays in Small-Sized Devices for Optical Diagnostics,” Sensors, vol. 22, no. 11, 2022, doi: 10.3390/s22114195.

Y. Fan et al., “Linear Regression vs. Deep Learning for Signal Quality Monitoring in Coherent Optical Systems,” IEEE Photonics J., vol. 14, no. 4, pp. 1–8, 2022, doi: 10.1109/JPHOT.2022.3193727.

D. van den Bergh et al., “A tutorial on Bayesian multi-model linear regression with BAS and JASP,” Behav. Res. Methods, vol. 53, no. 6, pp. 2351–2371, 2021, doi: 10.3758/s13428-021-01552-2.

R. F. Siregar, “Development of pH Sensing Devices Based on Optical Fluorescents with Rapid Measurement, Low Cost and Wireless Monitoring,” JAREE (Journal Adv. Res. Electr. Eng., vol. 4, no. 2, pp. 87–93, 2020, doi: 10.12962/j25796216.v4.i2.126.

A. Nursyahid, H. Helmy, A. I. Karimah, and T. A. Setiawan, “Nutrient Film Technique (NFT) hydroponic nutrition controlling system using linear regression method,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1108, no. 1, p. 012033, 2021, doi: 10.1088/1757-899x/1108/1/012033.

A. R. Lubis, H. R. Harefa, Al-Khowarizmi, Julham, M. Lubis, and R. F. Rahmat, “Human blood group type detection prototype focusing on agglutinin using microcontroller based photodiode,” Bull. Electr. Eng. Informatics, vol. 13, no. 4, pp. 2310–2319, 2024, doi: 10.11591/eei.v13i4.7007.

N. Evalina, F. I. Pasaribu, H. A. Aziz, and Z. A. Gultom, “The using of ATmega 2560 micro-controller for LPG leakage detection,” AIP Conf. Proc., vol. 2702, no. 1, p. 50005, 2023, doi: 10.1063/5.0154957.

F. I. Pasaribu, P. Harahap, and M. Adam, “The Design of Energy Storage Circuits for Efficient Use of Electric Power on Computer Devices,” Budapest Int. Res. Exact Sci. (BirEx)Journal, vol. 2, no. 3, pp. 368–375, 2020.

P. Saha, T. Rahman, and K. M. Abrar Yeaser, “Design and Comparative Analysis of Robust Non-Inverting DC-DC Buck-Boost Converters: Exploring Three Distinct Configurations for Optimal Performance,” in 2023 5th International Conference on Sustainable Technologies for Industry 5.0 (STI), 2023, pp. 1–6. doi: 10.1109/STI59863.2023.10464902.

J.-H. Boo et al., “A Single-Trim Switched Capacitor CMOS Bandgap Reference With a 3σ Inaccuracy of +0.02%, −0.12% for Battery-Monitoring Applications,” IEEE J. Solid-State Circuits, vol. 56, no. 4, pp. 1197–1206, 2021, doi: 10.1109/JSSC.2020.3044165.

R. F. Siregar, A. Affandi, R. Rohana, A. R. Nasution, and I. Tanjung, “IoT Smart Control System: Smoke and Fire Detection Using SIM900A Module,” J. Electr. Technol. UMY, vol. 7, no. 2, pp. 48–56, 2024, doi: 10.18196/jet.v7i2.19908.

S. Banerjee, Mathematical modeling, 2nd ed. London, England: Chapman and Hall, 2021.

Z. Ghemari and S. Belkhiri, “Mechanical Resonator Sensor Characteristics Development for Precise Vibratory Analysis,” Sens. Imaging, vol. 22, no. 1, p. 40, 2021, doi: 10.1007/s11220-021-00361-3.

D. Gatinel et al., “A New Method to Minimize the Standard Deviation and Root Mean Square of the Prediction Error of Single-Optimized IOL Power Formulas,” Transl. Vis. Sci. Technol., vol. 13, no. 6, p. 2, 2024, doi: 10.1167/tvst.13.6.2.




DOI: https://doi.org/https://doi.org/10.17529/jre.v21i3.42384

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


View My Stats

 

Creative Commons License

Jurnal Rekayasa Elektrika (JRE) is published under license of Creative Commons Attribution-ShareAlike 4.0 International License.