Submissions

Online Submissions

Already have a Username/Password for Jurnal Rekayasa Kimia & Lingkungan?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

1. General Guide of Manuscript

Manuscript format could be sent in doc, docx or rtf file format. Submitted manuscript accepted for publication or even published elsewhere is unacceptable and will not be published in Jurnal Rekayasa Kimia dan Lingkungan (JRKL). Manuscripts that is revision or elaboration of seminar, symposium, and workshop manuscripts could be published in JRKL by mentioning such things while submitting them. Manuscript sent to JRKL must be free plagiarism (similarity < 20%).

Author is also necessary to send document in relation to Publishing Agreement form that has been signed (scan copy from filled, original form) together with manuscript that will be sent online (supplementary file). File of Publishing Agreement form could be downloaded HERE.

2. Manuscripts types

Manuscripts published by the journal present research, article reviews, or case studies that have not been published in other scientific journals and are not being considered for publication in other journals. If a manuscript has been presented at a conference, please include the name, location, and date of the conference in a footnote.

3. Language

The author is required to prepare the manuscript in the English version.

4. Format

  1. Manuscripts consist of Title, Authors’ names, Abstract, Keywords, Introduction, Methodology, Results and Discussion, Conclusions, Acknowledgments (if needed), Notation (if needed), and References.
  2. Type your manuscript using Microsoft Word 6.0 or higher on A4 paper (210 mm × 297 mm). The manuscript should be single-spaced, with the main text using Verdana font of 9 points. The abstract, table label, and figure label must use Verdana font of 8 points.
  3. Font-size guidelines for every part of the manuscript are explained in more detail in the journal template.
  4. The paper page should be set with a left margin of 3 cm, a right margin of 2.5 cm, a top margin of 3.3 cm, and a bottom margin of 2.5 cm. In the title section, the author’s name and affiliation and the abstract must be typed in one column with the rest of the paper must be typed in two columns with a distance between columns of 1 cm. From the Introduction through to the References, the manuscript must be in one column.
  5. The use of SI units is expected. Chemical and mathematical equations should be numbered as follows: (1), (2), etc.
  6. Manuscrpt template could be downloaded HERE.

5. Manuscript Requirements

Title. The title should be no more than 20 words, be clear and informative. It must be typed with a 12-point Verdana font—in a bold Verdana font.

Author’s name. The author’s name (or authors’ names) should be written out fully without a title, accompanied by the name and the address of the institution at which each author works as well as his or her email address.

Please note that all author name and their email should be entry during submission of the manuscript to make sure the authors name appear in the online of list of contents when the paper published. 

Abstract. The abstract should be written in Indonesian and English and should not exceed 250 words. An abstract is a summary of the manuscript that provides a concise description of the research and its results without stating the author’s opinions.

Keywords. Keywords should be written in Indonesian and English, with as many as five terms listed below the abstract.

Figures, Graphs, and Tables should be numbered in order of appearance in the manuscript and should be submitted in a form ready to be printed. Every figure should be briefly labeled below the figure, and every table should be briefly labeled above the table. Figures that consist of photos should be submitted in their original form. If a figure or table is cited, the source should be given in accordance with the corresponding entry in the list of references. Tables should be single-spaced, and no vertical lines should be used. Each figure should be no larger than 10 cm × 15 cm. 1. Please make sure it has good quality, with pixel density larger than 250 dpi.

References. Authors should use recent sources; sources published within the last five years should constitute at least 80% of the references. In-text citations to works given in the reference list should give, within parentheses, the name of the first author and the year of publication. If a work has more than two authors, the format should be as follows: (Ahmad et al., 1999). If a work has two authors, both names should be given: (Leder and Bruno, 2000). The corresponding entry in the list of references should give the names of all authors. Each title should be given in its entirety. Reference list entries should be arranged alphabetically by the last names of the first authors.

Authors are strongly encouraged to use Mendeley software to to further enhance the quality of reference writing.

A reference list entry for a scientific journal should be written as follows:
Serbezov, A.S., Sotirchos, S.V. (1997) Mathematical modelling of the adsorptive separation of multicomponent gaseous mixtures, Chemical Engineering Science, 52, 79–91.

A reference list entry for a book should be written as follows:
Skelland, A.H.P (1974) Diffusional Mass Transfer, John Wiley & Sons, New York.

Shinnar, R. (1987) Use of residence and contact time distributions in reactor design, in Carberry, J.J., Varma, A. (eds.), Chemical Reaction and Reactor Engineering, Marcel Dekker, New York.

A reference list entry for a proceeding should be written as follows:
Berbner, S., Loffler, F. (1994) Pulse jet cleaning of rigid ceramic barriers filters separating hard and brown coal fly ashes at high temperature, Proceeding of the 11th International Pittsburgh Coal Conference, Pittsburgh, 12–16 September, 1357–1363.

A reference list entry for a thesis or dissertation should be written as follows:
Riley, R. J. (1987) The magnetically stabilized fluidized bed as a solid/liquid separator, M.S. Thesis, University of Michigan, U.S.A.

A reference list entry for a patent should be written as follows:
Primack, H.S. (1983) Method of stabilizing polyvalent metal solutions, U.S. Patent No. 4,373,104.

6. Manuscript Submission

Manuscript to be published by the Journal of Chemical Engineering and Environment (JRKL) must be registered online through the journal website http://jurnal.unsyiah.ac.id/RKL. Please make sure you log in first to continue the process of submitting articles.

To avoid delays in article processing, please make sure to entry the name and email address of all author and the phone number of corresponding author.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. Submitted file is in Microsoft Word format (doc, docx or rtf).
  2. Your manuscript is written as the Journal of Chemical Engineering and Environment (JRKL) template.
  3. Manuscript is written in good and correct English, and the English manuscript has been checked including the grammar and the spelling.
  4. The cited reference is the latest reputable journal at least 80% from the total of cited references.
  5. All authors have read the manuscript and agree to publish it in the Journal of Chemical Engineering and Environment.
  6. All authors agree to follow up the article processing until final decision is declared. Make sure to upload a publishing agreement form together with manuscript during submission procedure.
 

Copyright Notice

Prior 2007, the copyright of the published articles owned by Teknik Kimia UNSYIAH. Since Vol.6 No. 1, 2007 until now, the copyright holder of all published articles are authors. Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Processing Charge (APC): 1500000.00 (IDR)

Article stated suitable for publishing in the Journal of Chemical Engineering and Environment will be charged publication fee of 1,500,000 (IDR). The fee has included the cost of two exemplar of printed version journal.

If you do not have funds to pay such fees, you will have an opportunity to waive each fee. We do not want fees to prevent the publication of worthy work.