Advanced Applications of Pozzolan-Derived Silica: Hydrophobic Agent Synthesis

Erda Rahmilaila Desfitri, Endah Mustikaningtias, Fajri Akbar Rizaldi, Ellyta Sari, Reni Desmiarti

Abstract


The Sumatera Barat province of Indonesia, particularly Padang Pariaman Regency, is rich in pozzolan, a natural resource characterized by high silica (SiO₂) and alumina (Al₂O₃) content. Despite its abundance, pozzolan remains underutilized, primarily used in conventional applications such as cement substitutes and brick production. This study investigates the extraction, purification, and application of pozzolan-derived silica for advanced industrial uses, focusing on synthesising hydrophobic materials. Silica was extracted from pozzolan using alkali and acid treatments, achieving a high-purity cristobalite phase with 93.86% SiO₂ content based on the X-ray diffraction (XRD) and X-ray fluorescence) XRF analysis. The cristobalite phase was combined with polydimethylsiloxane (PDMS) to develop a hydrophobic agent. Hydrophobic performance was evaluated using water contact angle (WCA) measurements, with two coating methods—swab coating and dip-coating—employed to test the materials. Results revealed that the cristobalite phase achieved the highest hydrophobicity when applied via dip-coating, reaching a WCA 114°. Fourier Transform Infrared (FT-IR) analysed the characteristics of a hydrophobic compound. Furthermore, varying PDMS concentrations influenced hydrophobic performance, with 0.4 grams of PDMS yielding the optimal WCA of 105.31° before diminishing returns were observed at higher concentrations due to aggregation effects. This research demonstrates the viability of pozzolan-derived silica as a sustainable and cost-effective raw material for hydrophobic agent synthesis. The findings highlight its potential applications in advanced industries, including water-repellent coatings, glass, ceramics, and catalysts. By advancing the utilization of natural pozzolan resources, this study contributes to sustainable material development and aligns with global efforts to enhance resource efficiency and innovation.


Keywords


Pozzolan; Silica; Hydrophobic; Water Contact Angle (WCA); Polydimethylsiloxane (PDMS)

Full Text:

PDF

References


Abu Bakar, N. H., Wan Ismail, W. N., Mohd Yusop, H., & Mohd Zulkifli, N. F. (2023). Synthesis of a water-based TEOS-PDMS sol-gel coating for hydrophobic cotton and polyester fabrics. New Journal of Chemistry, 48(2), 933–950. https://doi.org/10.1039/d3nj03206j

Alp, I., Deveci, H., Süngün, Y. H., Yilmaz, A. O., Kesimal, A., & Yilmaz, E. (2009). Pozzolanic characteristics of a natural raw material for use in blended cements. Iranian Journal of Science and Technology, Transaction B: Engineering, 33(4), 291–300. https://www.researchgate.net/publication/258222417

Armal, F., Dias, L., Mirão, J., Pires, V., Sitzia, F., Martins, S., Costa, M., & Barrulas, P. (2023). Chemical Composition of Hydrophobic Coating Solutions and Its Impact on Carbonate Stones Protection and Preservation. Sustainability (Switzerland), 15(22), 1–21. https://doi.org/10.3390/su152216135

Bae, G., Min, B., Jeong, Y., Lee, S., Jang, J., & Koo, G. (2009). Superhydrophobicity of Cotton Fabrics Treated with Silica Nanoparticles and Water-Repellent Agent. Journal of Colloid and Interface Science, 337, 170–175. https://doi.org/10.1016/j.jcis.2009.04.066

Banerjee, S., Dionysiou, D. D., & Pillai, S. C. (2015). Self-cleaning applications of TiO2 by photo-induced hydrophilicity and photocatalysis. Applied Catalysis B: Environmental, 176–177, 396–428. https://doi.org/10.1016/j.apcatb.2015.03.058

Barthwal, S., Uniyal, S., & Barthwal, S. (2024). Nature-Inspired Superhydrophobic Coating Materials: Drawing Inspiration from Nature for Enhanced Functionality. Micromachines, 15(3). https://doi.org/10.3390/mi15030391

Bixler, G., & Bhushan, B. (2012). Bioinspired rice leaf and butterfly wing surface structures combining shark skin and lotus effects. Soft Matter, 8, 12139–12143. https://doi.org/10.1039/c2sm26655e

Çok, S. S., & Gizli, N. (2020). Hydrophobic silica aerogels synthesized in ambient conditions by preserving the pore structure via two-step silylation. Ceramics International, 46(17), 27789–27799. https://doi.org/10.1016/j.ceramint.2020.07.278

Danish, M. (2022). Contact Angle Studies of Hydrophobic and Hydrophilic Surfaces BT - Handbook of Magnetic Hybrid Nanoalloys and their Nanocomposites (S. Thomas & A. Rezazadeh Nochehdehi (eds.); pp. 761–782). Springer International Publishing. https://doi.org/10.1007/978-3-030-90948-2_24

Desfitri, Erda R, Desmiarti, R., Sari, E., Silaban, P. N., Dhani, S. R., & Dalimunthe, Y. A. (2023). Effect of pre-treatment on silica extraction as an initial study on pozzolan utilization in west sumatra. 29(1), 29–35. https://doi.org/10.36706/jtk.v29i1.1429

Desfitri, Erda Rahmilaila, Desmiarti, R., Martynis, M., & Dhani, S. R. (2022). Analysis and Characterization of Pozzolan Potential as Silica (SiO2) Source for Enhancing Local Resources. 6, 96–105. https://doi.org/10.26760/jrh.V6i2.96-105

Dewa, E., Musyarofah, Nurbaiti, U., Triwikantoro, Firdaus, S., & Pratapa, S. (2015). Enhancing the Value of Local Silica Sand from Bancar as a Fuel-Cell Sealing Material. Advanced Materials Research, 1112(May 2016), 262–265. https://doi.org/10.4028/www.scientific.net/amr.1112.262

Embong, R., Shafiq, N., Kusbiantoro, A., & Nuruddin, M. F. (2016). Effectiveness of low-concentration acid and solar drying as pre-treatment features for producing pozzolanic sugarcane bagasse ash. Journal of Cleaner Production, 112, 953–962. https://doi.org/10.1016/j.jclepro.2015.09.066

Fabien, A., Lefebvre, G., Badens, E., Calvignac, B., Chaudanson, D., Ranguis, A., & Crampon, C. (2024). Contact angle of ethanol, water, and their mixtures on stainless steel surfaces in dense carbon dioxide. Journal of Colloid and Interface Science, 655, 535–545. https://doi.org/10.1016/j.jcis.2023.10.163

Feng, C., Li, Y., Luo, Y., Zhang, L., Zong, Y., & Zhao, K. (2024). Mechanisms of Hydrophobic Recovery of Poly(dimethylsiloxane) Elastomers after Plasma/Corona Treatments: A Minireview. Langmuir, 40(45), 23598–23605. https://doi.org/10.1021/acs.langmuir.4c03086

Firdous, R., Stephan, D., & Djobo, J. N. Y. (2018). Natural pozzolan based geopolymers: A review on mechanical, microstructural and durability characteristics. Construction and Building Materials, 190, 1251–1263. https://doi.org/10.1016/j.conbuildmat.2018.09.191

Gorbounov, M., Halloran, P., & Masoudi Soltani, S. (2024). Hydrophobic and hydrophilic functional groups and their impact on physical adsorption of CO2 in presence of H2O: A critical review. Journal of CO2 Utilization, 86(August), 102908. https://doi.org/10.1016/j.jcou.2024.102908

Guo, W., & Errington, J. (2019). Effect of Surface Hydrophilicity on the Interfacial Properties of a Model Octane-Water-Silica System. The Journal of Physical Chemistry C, 123. https://doi.org/10.1021/acs.jpcc.9b04970

Hanum, F. F., & Rahayu, A. (2022). A Study for Silika Utilization and Its Separation Method from. 02(01), 26–32. https://doi.org/10.33292/ost.vol2no1.2022.44

He, H., & Guo, Z. (2021). Superhydrophobic materials used for anti-icing Theory, application, and development. IScience, 24(11), 103357. https://doi.org/10.1016/j.isci.2021.103357

Jahangiri, F., Hakala, T., & Jokinen, V. (2020). Long-term hydrophilization of polydimethylsiloxane (PDMS) for capillary filling microfluidic chips. Microfluidics and Nanofluidics, 24(1), 1–11. https://doi.org/10.1007/s10404-019-2302-2

Jang, N. S., Noh, C. H., Kim, Y. H., Yang, H. J., Lee, H. G., & Oh, H. S. (2023). Evaluation of a Hydrophobic Coating Agent Based on Cellulose Nanofiber and Alkyl Ketone Dimer. Materials, 16(12). https://doi.org/10.3390/ma16124216

Jhaveri, J. H., & Murthy, Z. V. P. (2016). A comprehensive review on anti-fouling nanocomposite membranes for pressure driven membrane separation processes. Desalination, 379, 137–154. https://doi.org/10.1016/j.desal.2015.11.009

Keshavarzi, S., Bouazara, B., Momen, G., & Jafari, R. (2023). Hydrophobicity and icephobicity of micropillared silicone rubber surfaces fabricated by compression molding. Results in Surfaces and Interfaces, 12(July), 100132. https://doi.org/10.1016/j.rsurfi.2023.100132

Lestari, Y. D., Rahayuningtyas, M. T., Utami, L. I., & Wahyusi, K. N. (2023). Silica Xerogel Sinthetis from Coconut Fiber by Sol-Gel Methodl. Jurnal Teknik Kimia, 17(2). https://doi.org/10.33005/jurnal_tekkim.v17i2.3785

Lipika, & Singh, A. K. (2022). Polydimethylsiloxane based sustainable hydrophobic/oleophilic coatings for oil/water separation: A review. Cleaner Materials, 6(July), 100136. https://doi.org/10.1016/j.clema.2022.100136

Liu, J. nan, Shen, X. yi, Wu, Y., Zhang, J., & Zhai, Y. chun. (2016). Preparation of ultrafine silica from potash feldspar using sodium carbonate roasting technology. International Journal of Minerals, Metallurgy and Materials, 23(8), 966–975. https://doi.org/10.1007/s12613-016-1313-1

Mahardika, D., Uma, S., Aditia, P., Sukiman, & Nata, Y. (2017). Analysis of Black Spot Failure on Ceramic Tableware Surfaces. Jurnal Rekayasa Teknologi Nusa Putra, 3(2), 1–13. https://doi.org/10.52005/rekayasa.v3i2.178

Mohd Sohor, M. A. H., Mustapha, M., & Mamat, O. (2017). The effect of milling duration on silicon dioxide characterization. MATEC Web of Conferences, 131, 4–9. https://doi.org/10.1051/matecconf/201713103007

Musyarofah, Nurbaiti, U., Dewa, E., Triwikantoro, Mashuri, Firdaus, S., & Pratapa, S. (2015). Use of Natural Silica Sand as a Component for Prospective Fuel Cell Sealing Materials. Advanced Materials Research, 1123(October), 383–386. https://doi.org/10.4028/www.scientific.net/amr.1123.383

Naat, J. N., Suyanta, S., & Nuryono, N. (2024). Hydrophobic modification of naturally magnetic silica with methyltrimethoxysilane for enhanced adsorption of chloramphenicol and ciprofloxacin. Case Studies in Chemical and Environmental Engineering, 10(August), 100878. https://doi.org/10.1016/j.cscee.2024.100878

Namazi, H., Fathi, F., & Dadkhah Tehrani, A. (2011). Hydrophobically modified starch using long-chain fatty acids for preparation of nanosized starch particles. Scientia Iranica, 18, 439–445. https://doi.org/10.1016/j.scient.2011.05.006

Neves, L. B., Afonso, I. S., Nobrega, G., Barbosa, L. G., Lima, R. A., & Ribeiro, J. E. (2024). A Review of Methods to Modify the PDMS Surface Wettability and Their Applications. Micromachines, 15(6), 1–27. https://doi.org/10.3390/mi15060670

Nurzam, F., & Anaperta, Y. (n.d.). Pozzolan Potential for Cement Raw Material at PT. Bumi Hijau Citra Andalas Site Batu. Jurnal Bina Tambang, 5(1), 106–115. https://103.216.87.80.ejounal.unp

Pasricha, R., & Sachdev, D. (2017). 7 - Biological characterization of nanofiber composites. In M. Ramalingam & S. Ramakrishna (Eds.), Nanofiber Composites for Biomedical Applications (pp. 157–196). Woodhead Publishing. https://doi.org/10.1016/B978-0-08-100173-8.00007-7

Pausa, Y. (2015). Optimization of Silica Purity Level, SiO2, From Palm Kernel Shell Ash Based on Acidification Concentration. Prisma Fisika, 3(1), 1–4. https://doi.org/10.26418/pf.v3i1.8903

Putri, R., Mulyawan, R., Nurlaila, R., (2022). Characteristics of silica from rice husk based on variations in burning time and temperature. 906–911. https://snft2022.ft.unimal.

Pyo, C. E., & Chang, J. H. (2021). Hydrophobic Mesoporous Silica Particles Modified with Nonfluorinated Alkyl Silanes. ACS Omega, 6(24), 16100–16109. https://doi.org/10.1021/acsomega.1c01981

Qi, Y., Shu, Z., & Luo, P. (2025). Interactions of hydrophobically associating polymers with anionic surfactant sodium dodecylbenzene sulfonate: Experiments and simulations. Journal of Molecular Liquids, 417, 126648. https://doi.org/10.1016/j.molliq.2024.126648

Rahayu, A., Fadhillah Hanum, F., Aldilla Fajri, J., Dwi Anggraini, W., & Khasanah, U. (2021). Pengolahan Limbah cair Industri dengan Menggunakan Silika: A Review: Industrial Liquid Waste Treatment Using Silica. Opscitech.Com, 02(01), 2776–169. https://www.opscitech.com/journal/article/view/38

Rahayu, F., & Zainuri, M. (2016a). The Effect of SiO2 Phase Type (Amorphous, Quartz, Cristobalite) on Hydrophobic Properties of Glass Media. Jurnal POMITS, 2, 1–7. https://api.semanticscholar.org/CorpusID:139635856

Riyandi, R., Rinaldi, N., Yunarti, R. T., Dwiatmoko, A. A., & Simanjuntak, F. S. H. (2024). Effect of various silica-supported nickel catalyst on the production of bio-hydrocarbons from oleic acid. International Journal of Renewable Energy Development, 13(4), 601–607. https://doi.org/10.61435/ijred.2024.60054

Rohmah, R., & Zainuri, M. (2021). Erratum To: the Influence of Silica Calcination Temperature Variation To the Hydrophobicity and Transmittance on Glass Substrate. Jurnal Neutrino, 13(1), 31. https://doi.org/10.18860/neu.v13i1.11561

Segui, P., Aubert, J. E., Husson, B., & Measson, M. (2013). Utilization of a natural pozzolan as the main component of hydraulic road binder. Construction and Building Materials, 40, 217–223. https://doi.org/10.1016/j.conbuildmat.2012.09.085

Sharma, S. K., Verma, D. S., Khan, L. U., Kumar, S., & Khan, S. B. (2018). Handbook of Materials Characterization. Handbook of Materials Characterization, 1–613. https://doi.org/10.1007/978-3-319-92955-2

Tharani, D., & Ananthasubramanian, M. (2024). Influence of pre-treatment processes on the purity and characteristics of silica extracted from rice husk. Biomass Conversion and Biorefinery, 14(11), 12517–12529. https://doi.org/10.1007/s13399-022-03728-y

Wang, Z., Yuan, L., Liang, G., & Gu, A. (2021). Mechanically durable and self-healing super-hydrophobic coating with hierarchically structured KH570 modified SiO2-decorated aligned carbon nanotube bundles. Chemical Engineering Journal, 408, 127263. https://doi.org/10.1016/j.cej.2020.127263

Wei, M., Kuang, Y., Duan, Z., & Li, H. (2023). The crucial role of catalyst wettability for hydrogenation of biomass and carbon dioxide over heterogeneous catalysts. Cell Reports Physical Science, 4(5), 101340. https://doi.org/10.1016/j.xcrp.2023.101340

Xu, W., Wei, J., Chen, J., Zhang, B., Xu, P., Ren, J., & Yu, Q. (2018). Comparative study of water-leaching and acid-leaching pretreatment on the thermal stability and reactivity of biomass silica for viability as a pozzolanic additive in cement. Materials, 11(9). https://doi.org/10.3390/ma11091697

Zhang, X., & Qin, Y. (2019). Contact angle hysteresis of a water droplet on a hydrophobic fuel cell surface. Journal of Colloid and Interface Science, 545, 231–241. https://doi.org/10.1016/j.jcis.2019.03.026

Zhao, M., Ma, X., Chao, Y., Chen, D., & Liao, Y. (2022). Super-Hydrophobic Magnetic Fly Ash Coated Polydimethylsiloxane (MFA@PDMS) Sponge as an Absorbent for Rapid and Efficient Oil/Water Separation. Polymers, 14(18). https://doi.org/10.3390/polym14183726

Zulkifli, N. S. C., Ab Rahman, I., Mohamad, D., & Husein, A. (2013). A green sol–gel route for the synthesis of structurally controlled silica particles from rice husk for dental composite filler. Ceramics International, 39(4), 4559–4567. https://doi.org/10.1039/D3NJ03206J




DOI: https://doi.org/10.23955/rkl.v20i1.43525

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) Erda Rahmilaila Desfitri, Endah Mustikaningtias, Fajri Akbar Rizaldi, Ellyta Sari, Reni Desmiarti

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

JURNAL REKAYASA KIMIA & LINGKUNGAN

Jurusan Teknik Kimia Universitas Syiah Kuala, Jl. Tgk. Syech Abdur Rauf No.7, Kopelma Darussalam, Banda Aceh, INDONESIA

 

PRINCIPAL CONTACT

Nasrul Arahman, Prof. Dr. S.T., M.T.
Phone: +62813-6092-7917
E-mail: rkl@che.usk.ac.id, nasrular@usk.ac.id

 

SUPPORT CONTACT

Mirna Rahmah Lubis
E-mail: mirna@che.usk.ac.id
Wahyu Rinaldi, ST, M.Sc.
E-mail: wahyu.rinaldi@che.usk.ac.id

 

VISITORS