The Effect of Non-Dental E-Glass Fiber Position on the Flexural Strength of Fiber Reinforced Composite

Mia Nur Aziza; Widya Puspita Sari; Netta Anggraini

doi:10.24815/cdj.v17i2.37503

The Effect of Non-Dental E-Glass Fiber Position on the Flexural Strength of Fiber Reinforced Composite

Mia Nur Aziza, Widya Puspita Sari, Netta Anggraini

Abstract

Fixed denture is a treatment used to replace missing teeth. Fiber Reinforced Composite using dental E-glass fiber is an alternative material due to its biocompatibility, good aesthetics, and adaptability to the oral cavity.However in Indonesia, its availibility is limited and the cost is relatively high. Non-dental E-glass fiber, which has been widely used in engineering sectors, has a composition that is largely similar to dental E-glass fiber. This study aims to understand the effect of the position of non-dental E-glass fiber on the flexural strength of Fiber Reinforced Composite. This experimental study tested Fiber Reinforced Composite with non dental E-glass fiber placed in various positions using a Universal Testing Machine (UTM), and the results were analyzed with One-Way ANOVA. The test results showed that Fiber Reinforced Composite with fiber positioned on the tension side has the highest flexural strength, at 213.11 MPa, while placement on the compression side has the lowest value of 179.98 MPa. It was concluded that the position of non-dental E-glass fiber affects the flexural strength of Fiber Reinforced Composite.

Keywords

E-glass fiber, Fiber reinforced composite, Posisi fiber, Kekuatan fleksural

Full Text:

PDF

References

Dosumu, O. O., Ogunrinde, J. T dan Bamigboye, S. A. Knowledge of consequences of missing teeth in patients attending prosthetic clinic in u.C.h. Ibadan. Annals of Ibadan postgraduate medicine. 2014.12(1); 42-48.

Oancea L., Burlibasa,M., Petre,A.E., Panaitescu,E dan Cristache,C.M. Predictive Model for Occlusal Vertical Dimension Determination and Digital Preservation with Three-Dimensional Facial Scanning. Journal Applied Science. 2020.doi:10.3390/app10217890

Alshehri, M., Alqahtani, W., Asiri, E dan Asiri, M. 2021. Awareness to consequences of teeth missing and prosthodontics treatment options among people of Aseer region, Saudi Arabia. Journal of Family Medicine and Primary Care. 2021.10(1); 307. 10.4103/jfmpc.jfmpc_1621_20

Patel, M, Tippadamppally, Sharma P, School of Dentistry. In European Journal of Molecular & Clinical Medicine. 2019. 7(11).

Newaskar, P. S., Sonkesriya, S., Singh, R., Palekar, U., Bagde, H dan Dhopte, A Evaluation and Comparison of Five-Year Survival of Tooth-Supported Porcelain Fused to Metal and All-Ceramic Multiple Unit Fixed Prostheses: A Systematic Review. Cureus. 2022. doi.org/10.7759/cureus.30338.

Ottawa. Porcelain-Fused-to-Metal Crowns Versus All-ceramic Crowns: A Review of the Clinical and Cost-Effectiveness. Dental Journal. 2015.12(2) ; 1-50. https://www.ncbi.nlm.nih.gov/books/NBK304693/

Bulbule N & Motwani BK. Comparative Study of Fracture Resistance of Porcelain in Metal Ceramic Restorations by Using Different Metal Coping Designs- An In Vitro Study. Journal of Clinical and Diagnostic Research 2014.8(11) ; 1-5.

McCabe JF &Walss AWG. Applied Dental Materials. Jakarta : Penerbit Buku edokteran EGC.2014.

Ballo A & Närhi T. Biocompatibility of Fiber-Reinforced Composites for Dental Applications. In Biocompatibility of Dental Biomaterials. 2017 ; 23–39. doi.org/10.1016/B978-0-08-100884-3.00003-5

Scribante, A., Vallittu, P.K., dan Ozcan, M. Fiber-Reinforced Composites for Dental Aplications. Biomed Research International. 2018. 1; 1-3. https://doi.org/10.1155/2018/4734986

Javed, M. Q. Fiber reinforced composite supported restoration of congenitally missing tooth by minimally invasive approach: Two years follow-up. Pakistan Journal of Medical Sciences. 2021. 37(3) ; 919-921. https://doi.org/10.12669/pjms.37.3.3873

Scribante, A dan Sfondrini, M. F. Orthodontic retainers. In Clinical Guide to Principles of Fiber-Reinforced Composites in Dentistry. Elsevier. 2017 ; 187– 202.https://doi.org/10.1016/b978-0-08- 100607-8.00011-3

Khan, A. S., Azam, M. T., Khan, M., Mian, S. A., dan Rehman, I. U. An update on glass fiber dental restorative composites: A systematic review. In Placement on Large Class II Cavities in Maxillary Premolars: An in Vitro Study. Enviro Dental Journal. 2015.4(2), 48–58. 10.12944/edj.04.02.04

Mekonen,S.W., Palani,S., Ravi,B., Atnaw,S.M., Desta dan Regassa,Y. Mechanical Properties of Bone Particulate and E-Glass Fiber Reinforced Hybrid Polymer omposite", Advances in Materials Science and Engineering, vol. 2022, Article ID 5902616, 7 pages. https://doi.org/10.1155/2022/5902616

Safwat,E.M., Khater, A.G.A., Elsatar, A.G.A & Khater,G.A. Glass fber-reinforced composites in dentistry Bulletin of the National Research Centre. 2021. 45(190) ; 1-9. doi.org/10.1186/s42269-021-00650-7

Faizah, A., Widjijono, W dan Nuryono, N. Pengaruh komposisi beberapa glass fiber non dental terhadap kelarutan komponen fiber reinforced. Majalah Kedokteran Gigi Indonesia. 2016. 2(1), 13. doi.org/10.22146/majkedgiind.11249

Zhu, L., Wang, Z., Bin Rahman, M., Shen,W dan Zhu, C. 2021. The curing kinetics of E-glass fiber/epoxy resin prepreg and the bending properties of its products. Materials. 2021. 14(16). https://doi.org/10.3390/ma14164673

Sari, W.P., Satria, Y., Sugeng, A.P., Kurnia, P., Adiva, A.P. Uji Kandungan E- Glass Fiber Non Dental dengan Menggunakan Teknik X-Ray Fluorescence Spektrofotometer (XRF) Test Content Of Non Dental E-Glass Fiber Using X-Ray Fluorescens Spektrofotometer (XRF). Menara Ilmu 2022.16(1) ; 122-128

Firdausy, M. D., Hadianto, E dan Zuhaila A. The Effect Of Non-Dental Glass Fiber Combination On Flexural Strength Of Prepolymerized Fiber-Reinforced Composite. In Medali Journal. 2022. 4.

Mehrpour, H., Farjood, E., Giti, R., Ghasrdashti, A.B dan Heidari, H. Evaluation of the Flexural Strength of Interim Restorative Materials in Fixed Prosthodontics. J Dent Shiraz Univ Med Sci. 2016. 17(3) ; 201-206.

Sharma, A., Samadi,F., Jaisal, JN., Saha, S. A Comparative Evaluation of Effect of Different Chemical Solvents on the Shear Bond Strength of Glass Fiber reinforced Post to Core Material. International Journal of Clinical Pediatric Dentistry. 2014. 7(3) ; 192–196. https://doi.org/10.5005/jp- journals-10005-1263

Fatimina, A.D., Benyamin, B dan Fathurrahman, H. Pengaruh Posisi Serat Kaca (Fiberglass) yang Berbeda Terhadap Kekuatan Fleksural Fiber Reinforced Acrylic Resin. Odonto Dental Journal. 2016. 3,(2) ; 128-132.

Magwa, K., Ahirwar, A., Bhargava, A., Khurana, N., Mishra, N dan Nigam, A. S. Comparative Analysis Of Flexural Strength Of Four Commercially Available Dental Restorative Materials. International Journal of Health Sciences.2022 ; 2577–2586. .https://doi.org/10.53730/ijhs.v6ns1.5326

Prasetyo,S.P., Harniati,E.D Budiono. Pengaruh pH Asam Terhadap Kekuatan Mekanik Fiber E-Glass: Systematic Review. Journal Universitas Muhammadiyah Semarang. 2020. 21(2) ; 1-10

Bahramian, N., Atai, M dan Naimi-Jamal, M.R. Ultra high molecular weight polyethylene fiber reinforced dental composites: Effect of fiber surface treatment on mechanical properties of the composites. Journal of Dental Materials.2015.31(9) ; 1029.10.1016/j.dental.2015.05.011

Septommy, C., Rini, D., dan Prostodonsia, B. 2014. Pengaruh Posisi dan Fraksi Volumetrik Fiber Polyethylene Terhadap Kekuatan Fleksural Fiber Reinforced Composite. Dental Jurnal. Institut Ilmu Kesehatan Bhakti Wiyata Kediri.2014. 47(1) ; 52-56.

Maharani, A. S., Widjijono, W dan Wahyuningtyas, E. Effect of glass fiber non-dental’s length and position on the flexural strength of FRC. Majalah Kedokteran Gigi Indonesia 2019. 1(1) ; 39. doi.org/10.22146/majkedgiind.40074

Alander P, Perea-Lowery L, Vesterinen K, Suominen A, SÄilynoja E dan Vallittu PK. Layer structure and load-bearing properties of fibre reinforced composite beam used in cantilever fixed dental prostheses. Dent Mater J. 2021.40(1) ; 165-172. doi:10.4012/dmj.2019-428

Batu, T dan Lemu, H. G. Investigation of mechanical properties of false banana/glass fiber reinforced hybrid composite materials. Results in Materials. 2020. 8. https://doi.org/10.1016/j.rinma.2020.100152

Garoushi, S., Gargoum, A., Vallittu, P. K dan Lassila, L. Short fiber-reinforced composite restorations: A review of the current literature. In Journal of investigative and clinical dentistry. 2018.9(3) 3. p. e12330. https://doi.org/10.1111/jicd.12330

Niewczas, A. M., Zamościńska, J., Krzyżak, A., Pieniak, D., Walczak, A dan Bartnik, G. Influence of fibre reinforcement on selected mechanical properties of dental composites. Acta of Bioengineering and Biomechanics. 2017. 19(2), 3–10. https://doi.org/10.5277/ABB-00486-2015-04

Khan1,A.A., Al-Kheraif,A.A., Al- Shehri,A.M., Sailynoja,E dan Vallittu,P.K. Polymer matrix of fiber-reinforced composites: changes in the semi- interpenetrating polymer network during the shelf life. Journal of the Mechanical Behavior of Biomedical Materials. 2018.78; 414–419. http://dx.doi.org/10.1016/j.jmbbm.2017.11.038

Sari,W.P., Sumantri, D., Imam, D.N.A dan Sunarintyas,S. 2014. Pemeriksaan Komposisi glass fiberkomersial Dengan Teknik x-Ray Fluorescence Spectrometer (Xrf). Jurnal B-Dent. 2014.1(2) ; 156- 16.

Das R, Ambardekar V dan Pratim Bandyopadhyay P. Titanium Dioxide and Its Applications in Mechanical, Electrical, Optical, and Biomedical Fields. Titanium Dioxide Advances and Applications. 2021. doi.org/10.5772/intechopen.98805

Umar, M. D., Muraliraja, R., Shaisundaram, V. S dan Wayessa, S. G. Influence of Future Material Nano- ZrO2and Graphene on the Mechanical Properties of Al Composites. Journal of Nanomaterials.2022.doi.org/10.1155/2022/1454037

Hossen, M.M., Chowdhury, F., Gafur, M. A dan Hakim, A.K.M.A 2014. Structural and Mechanical Properties of Zirconia Toughened Alumina (ZTA) Composites. International Journal of Engineering Research & Technology.2014. 3(2). www.researchgate.net/publication/274075752

Spyrides, S. M. M., do Prado, M. D., Simão, R. A dan Bastian, F. L. Effect of plasma and fiber position on flexural properties of a polyethylene fiber- reinforced composite. Brazilian Dental Journal. 2015. 26(5), 490–496. doi.org/10.1590/0103-644020130222

Fediuk, R., Smoliakov, A dan Muraviov, A. 2017. Mechanical properties of fiber- reinforced concrete using composite binders. Advances in Materials Science and Engineering, 2017. https://doi.org/10.1155/2017/2316347

Duymus, Z. Y., Karaalioglu, F. O dan Suleyman, F. 2014. Flexural strength of provisional crown and fixed partial denture resins both with and without reinforced fiber. J Mater Sci Nanotechnol. 2014. 2(1).

Safitri,D.A.N., Hadianto,E & Wardhana,E.S. The Effect Of Addition Non Dental Glass Fiber Towards The Flexural Strength Of Nanofil Resin Composite. Medali Journal. 2022.4(1).

Moftah, H. M., Turkmani, I dan Darwich, K. Fracture strength of acrylic resin reinforced with glass fibers in simulated implant-supported overdenture abutments. Yemeni Journal for Medical Sciences 2017.11(1), 31-37

Caixeta, R. V., Guiraldo, R. D., Berger, S.B., Kaneshima, E. N., Júnior, É. M. F., Drumond, A. C., Júnior, A. G dan Lopes, M. B. Influence of glass-fiber reinforcement on the flexural strength of different resin composites. Applied Adhesion Science. 2016. 3(1). doi.org/10.1186/s40563-015-0053-1

Albar, N.H.M., dan Khayat, W.F. 2022.Evaluation Of Fracture Strength Of Fiber- Reinforced Direct Composite Resin Restorations: An In Vitro Study Polymers.2022.14 (20)..doi.org/10.3390/polym14204339.

DOI: https://doi.org/10.24815/cdj.v17i2.37503