Analisis Kecacatan Flakes pada Produk Oriflakes di PT Serealia Prima Nutrisia Daerah Istimewa Yogyakarta

Farah Mustika Ningtyas, Ika Dyah Kumalasari

Abstract


Product defects are one of the critical parameters to maintaining quality and consumer interest in marketed products. This study aims to determine the proportion of defects, types, and factors causing defects in flakes in Oriflakes products at PT Serelia Prima Nutrition suggestions for improvement are made to reduce the number of defective flakes. The method used to analyze defects that occur uses seven tools: control charts, Pareto diagrams, and fishbone diagrams. The number of flake defects is 14,8 kg for one month, the defects found in flakes are still under control because they do not cross the UCL and LCL limits. The types of flakes defects that occur are the color of the flakes that are too dark (burnt), too thick, lumpy, and the middle part is immature with the most dominant type of defect being the color of the flakes that are too dark (burnt) by 44%. Some of the leading causes of defective flakes are process and machine factors. Suggestions for improvements that can be made to prevent or reduce flakes defects are by always monitoring and checking the entire production process from weighing raw materials to the health of production tools and machines.

Keywords


Flakes; control chart; fishbone diagrams; Pareto chart

Full Text:

PDF

References


Elmas, M. S. H. 2017. Pengendalian Kualitas dengan Menggunakan Metode Statistical Quality Control (SQC) untuk Meminimumkan Produk Gagal pada Toko Roti Barokah Bakery. WIGA: Jurnal Penelitian Ilmu Ekonomi, Vol. 7, No. 1, Hal. 15-22.

Heizer, J. dan B. Render. (2015). Prinsip – Prinsip Manajemen Operasi. Edisi ke – 11. Diterjemahkan oleh Hirson, Ratna Saraswati dan David Wijaya. Jakarta: Salemba Empat.

Maskan, M. 2012. Advances in Food Extrusion Technology. Boca Raton: CRC Press.

Murnawan, H. 2014. Perencanaan Produktivitas Kerja Dari Hasil Evaluasi Produktivitas Dengan Metode Fishbone Di Perusahaan Percetakan Kemasan PT.X. Jurnal Teknik Industri HEURISTIC, 11(1).

Nadila, M., Suswardji, E., Aditya, R., & Putra, K. 2021. Analisis Pengendalian Mutu Produk Menggunakan Metode Statistical Process Control (SPC) Pada PT Outdoor Footwear Networks (Vol. 20, Issue 1).

Permono, L., Salmia, S. T., Septiari, R., Program, ), & Industri, S. T. (2022). Penerapan Metode Seven Tools dan New Seven Tools Untuk Pengendalian Kualitas Produk (Studi Kasus Pabrik Gula Kebon Agung Malang). Jurnal Mahasiswa Teknik Industri), 5(1).

Siregar, Baldric, dkk. 2013. Akuntansi Manajemen. Jakarta: Salemba Empat.

Sugiyono. 2013. Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.

Suhartini, N. (2020). Penerapan Metode Statistical Proses Control (SPC) Dalam Mengidentifikasi Faktor Penyebab Utama Kecacatan Pada Proses Produksi Produk ABC. Jurnal Ilmiah Teknologi Dan Rekayasa, 25(1), 10–23. https://doi.org/10.35760/tr.2020.v25i1.2565

Sunarto, & Nugroho, H. S. (2020). Buku Saku Analisis Pareto. Surabaya: Prodi Kebidanan Magetan Politekkes Kemenkes.

Kementerian Kelautan dan Perikanan. 2018. Statistik Perikanan Provinsi Riau. Dinas Kelautan dan Perikanan Provinsi Riau. Pekanbaru.

Muchtadi T. R., Sugiono., Ayustaningwarno, s. 2010. Ilmu Pengetahuan Bahan Pangan. Alfabeta. Bandung.

Rakhmawati, N., Amanto, B. S., & Praseptiangga, D. (2014). Formulasi Dan Evaluasi Sifat Sensoris Dan Fisikokimia Produk Flakes Komposit Berbahan Dasar Tepung Tapioka, Tepung Kacang Merah (Phaseolus Vulgaris L.) Dan Tepung Konjac (Amorphophallus Oncophillus). Jurnal Teknosains Pangan, 3(1).

Rowe, R. C., Sheskey, P.J., Quinn, M.E. 2009. Handbook of Pharmaceutical Excipients, 6th edition. Pharmaceutical Press. London.

Sembiring, L., Ilza, M., Diharmi, A. 2018. Karakteristik Minyak dari Lemak Perut Ikan Patin (Pangasius hypophthalmus) yang Dimurnikan Menggunakan Bentonite. Jurnal Pengolahan Hasil Perikanan Indonesia.

Setyaningsih, D. A., Apriyantono, A., Sari, M. P. 2010. Analisis Sensori untuk Industri Pangan dan Agro. Institut Pertanian Bogor Press. Bogor.

Sullivan, J. C., Budge, S.M., St-Onge, M. 2011. Modeling The Primary Oxidation in Commercial Fish Oil Preparations. Journal of Lipids. 46: 87-93.




DOI: https://doi.org/10.17969/jtipi.v16i1.27525

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Teknologi dan Industri Pertanian Indonesia





Creative Commons LicenseISSN: 1411-4623E-ISSN: 2460-4534
Copyright© 2009-2024 | ISSN: 2085-4927 | EISSN: 2442-7020 
JTIPI is licensed under a Creative Commons Attribution 4.0 International License.

 

Published by: 
Agricultural Product Technology Department, Faculty of Agriculture, Univerisitas Syiah Kuala 

Supported by
LPPM USK
Himpunan Profesi (patpi)
AFTA


Address: 
Jl. Tgk. Hasan Krueng Kalee No. 3, Kopelma Darussalam,
Banda Aceh, 23111, Indonesia.
Email: jtipi@usk.ac.id


Online Submissions & Guidelines Editorial Policies | Contact Statistics Indexing | Citations